
Virtual Spider Box Guide Page 12
MODIFICATION TO THE FOOT CONTROL
NOTE: This is only required if the foot control card has been manufactured in the USA before 2005.
This is NOT required if the card has been manufactured by Autocue (UK) and has the GEMINI label
Unscrew and remove the Green and Blue wires from the Fwd/Rev switch (cut and discard)
Cut the Blue and Green wires from the 6-way Molex connector
Now reconnect the Green and Blue wires that were on the 6-way Molex connector to the Fwd/Rev switch
Komentáře k této Příručce